News and Information

　 　Quick-opening manhole This product belongs to the sanitary‑grade pressure manhole series, typically featuring a pressure rating of up to 0.3 MPa. It is primarily constructed from stainless steel grades such as 304, 316, 321, and 316L. Below, we’ll outline its key features.

　　Quick-opening manholes are typically installed on large tanks and vessels in industries such as dairy, brewing, beverage production, pharmaceuticals, and bioengineering. Because these applications demand high pressure‑resistance, the selection of stainless steel plate grades and thicknesses, along with stringent requirements for strength and sealing, are critical technical considerations. In fact, quick-opening manholes feature a rapid‑opening design that offers convenient access, enhanced safety, an aesthetically pleasing appearance, and practical functionality. Both the interior and exterior surfaces are usually finished with either mirror polishing or a matte finish, achieving a surface roughness (Ra) of 0.8 µm or better. Additionally, it’s worth noting that quick-opening manholes are generally mounted at the bottom or top of storage tanks and are often used in conjunction with fire extinguishers. This arrangement not only helps prevent sudden pressure surges or vacuum emergencies—conditions that could damage the tank and endanger personnel—but also provides significant safety and fire‑protection benefits, thereby safeguarding the tank to a great extent. If you’re still unfamiliar with these details, we recommend taking a closer look at the relevant documentation; it may prove helpful in the future.

　　To prevent Quick-opening manhole During operation, if the tank body leaks, the installation of quick‑opening manholes must also adhere to strict requirements, with safety procedures followed step by step. The same applies to manufacturing: the mating surfaces of the upper and lower flanges must be perfectly flat, with no lifting or unevenness. When installing a quick‑opening manhole, align it with the center of gravity and tighten the bolts evenly to prevent deformation of the cover plate or uneven stress that could lead to oil leakage. The sealing ring of a quick‑opening manhole is typically made of silicone rubber; common sizes range from 150 mm to 600 mm. Featuring a quick‑open design, these manholes are convenient, safe, aesthetically pleasing, and highly practical. Both the interior and exterior surfaces are usually finished with either mirror polish or matte finish, with a surface roughness (Ra) of 0.8 µm or better. This product is generally installed at the bottom or top of storage tanks and is often used in conjunction with fire extinguishers. Such arrangements help prevent sudden pressure surges or vacuum emergencies caused by accidents, while also protecting the tank and minimizing the risk of personnel injury or loss. Our company boasts strong technical expertise and state‑of‑the‑art equipment, ensuring that all products are manufactured in strict compliance with industry standards. Available materials include 304, 316, 316L, 321, and 2205, with quality meeting GMP requirements.

　　After the above introduction, I believe everyone now understands. Quick-opening manhole What is it? After reading the article, if you ever encounter a situation like this, you’ll know which aspects to consider when making your choice. Hopefully, this will be helpful to you.